The inventors shield uses a wireless pipe, which is a special wireless RF module that allows you to easily and reliably, send and receive error-free wireless data between two or more Arduino boards.
It’s Long Range – distances up to 500 feet.
It’s Error Free – built-in forward error correction and data recovery, you only ever receive cleaned and CRC verified data.
It’s Simple To Use – anything you input, is wirelessly transmitted, then cleanly outputted for you on the other end.
It’s Immune To Noise – your data inside the wireless pipe is protected from the elements outside such as interferences like WiFi, Bluetooth, Zigbee, cordless phones, cellular phones, all types of servo and motor noise, etc. All things which typically stop your wireless project in its tracks, are no longer an issue.
|Low Supply Voltage||2.1V|
|Typical Supply Voltage||3V|
|High Supply Voltage||3.6V|
|Transmit Current||14mA, 2uA ULP|
|Receive Current||17mA, 2uA ULP|
|ETSI – CE Tested||Yes|
|Outdoor Range||500 Feet (150 Meters)|
|Size – Width||53.4mm (2.102 Inch)|
|Size – Length||76.4mm (3.007 Inch)|
|Size – Height||24.3mm (0.956 Inch)|
|RF Interface||Built-In Chip Antenna|
|Pin Pitch||2.54mm (0.100 Inch)|
|Error Handling||16 BIT CRC|